The New injectors come with an EV6 connector eliminating the need for adapter harnesses. The NEW USCAR 63lb Sieman Deka Injectors are available now  . The New injectors come with an EV6 connector eliminating the need for adapter harnesses. Adding an aftermarket Supercharger/Turbocharger may max out your current injectors. The fuel injector flow must be matched to the airflow requirements of the engine over the entire rpm operating range. The injectors must be able to supply a large amount of fuel at wide-open throttle to prevent high rpm lean out, and transitional amounts to cover all of the operating conditions in between. Supercharged engines in particular place even more rigorous demands on an injector range because of their increased airflow capability.

Specifications

  • Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
  • Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
  • Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
  • Gain: 0.11ms/mg
  • Offset: 0.055ms
  • Turn on time @ 14VDC: 1.14ms
  • Turn off time: 0.85ms @ 600KPa
  • Connector: USCAR EV6
  • Series: DEKA 4 ( DEKA IV )
  • Orifice Type: Multi-orifice
  • Spray Pattern: 30 Degree Spray Cone
  • Factory fitted with Viton upper and lower o-rings

Siemens Deka 63lb EV6 USCAR High Impedance Fuel Injectors

SKU: 3301
$390.00Price
    • (8) EV6 Fuel Injectors